Folding boxes.png)
.png)
.png)
Stand-up pouch.png)
Roll labels
Membrane cansWorth knowing
Data check for membrane cans
Punch
Here your folding box is cut out before it gets glued.
Here your folding box is cut out before it gets glued.
Safety distance
Place texts and images with a safety distance of 6 mm from the die cutter and the varnish-free zone.
Place texts and images with a safety distance of 6 mm from the die cutter and the varnish-free zone.
Trim / Bleed
Create background elements 3 mm beyond the die cutter.
Create background elements 3 mm beyond the die cutter.
Varnish free zone
Background elements can be created here.
Background elements can be created here.
KINDERLEICHT
So funktionierts
Type your text
The requirements in detail
Convert / embed fonts
Convert your fonts to paths, or embed them in the document.
Color space CMYK
Use the CMYK color space for your print file (not RGB).
Do not use PANTONE
Pantone colors cannot be printed in digital printing. We simulate these automatically via CMYK.
Image resolution min. 300dpi
The resolution of embedded images should be at least 300dpi.
Font size min. 6pt
The size of your fonts should be at least 6 pt.
Line width min. 0.5pt
The line width in your print data should be at least 0.5pt.
Black always as 100% K
Always create black fonts and elements (shapes, lines, color areas) as 100% K (0C / 0M / 0Y / 100K).
Safety distance 1.5-3.0mm
The safety distance to the edge of your print data (punch) should be 1.5 mm for labels and 3.0 mm for all other products.
Format PDF/X-4:2010
Save your print data as PDF in PDF/X-4:2010 format. Avoid the following data formats: .docx / .ppt / .ai / .eps / .jpg / .png / .tiff
Edge trim / bleed 3 mm
Your print file must be created with 3 mm bleed so that important elements are not cut off.
Deposit opaque white
Duplicate the element to be overprinted and place it in the background. Create the background element with a spot color called "HPI-White" (20% cyan). Then set the upper element to "overprint".
Type your text
